Table of Contents
Advertisement
Rear Panel
AC220-50Hz
AC POWER
1
1.
AC220V POWER IN - Connect the working power source. When connecting, first
connect the plug on the machine, and then connect it to the power source.
2.
Fan Cooling Window
3.
Speaker OUT
4.
LINE1 /MIC2 IN - Can connect MIC and other external audio sources.
5.
LINE1/PP/MIC2 - Audio source selection. Slide left or right to select AUX1 or MIC2
or MIC2(PP) with phantom power.
Note: In the PP position, only microphones driven by phantom power can be
connected, and no other signal sources can be connected.
6.
Two inputs with the highest priority
7.
Volume control for two inputs with the highest priority
8.
AUX2 IN
9.
1VRMS AUX OUT
OPERATION
Bluetooth Mode
•
Press the "MODE" button on the panel of the machine to enter the Bluetooth
pairing mode, the digital screen will display BL. and the "." will flash until a
successful pairing is obtained.
•
Turn on the Bluetooth pairing of the device to be connected and search for the
mixer amp device name. If required use passcode "0000" to complete.
•
The audio source files in the connected device can be played after the pairing is
successful.
USB Mode
•
When the USB flash memory stick is inserted, it will automatically switch to the
USB mode (plug and play), and the amplifier will play any tracks in MP3 format.
AUX Mode
•
The auxiliary in mode is the default mode of this system. When the USB flash
memory is not inserted, and the Bluetooth is not connected.
•
The digital screen displays AUX after power-on.
COM
100V
OUTPUT
2
3
9
8
LINE OUT
LINE2 IN
LINE1/MIC2 IN
LINE
5
INPUT PRIORITY
MIN
SELECT
GND
LINE1
PP
MIC2
INPUT PRIORITY
4
5
7
VOLUME
MAX
IN GND 100V
6
Advertisement
Table of Contents
