Gigabyte GA-970A-DS3P User Manual page 19

System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
Memory Frequency (MHz)
Advanced Memory Settings
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
DRAM Timing Selectable
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below
When using a non-XMP memory module or
or , this item will display the value based on the SPD data on the XMP memory.
The value displayed here is dependent on the CPU being used.
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
Channel A/B Timing Settings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please
Advanced Voltage Settings
This sub-menu allows you to set CPU and memory voltages.
PC Health Status
Reset Case Open Status
Enabled Clears the record of previous chassis intrusion status and the Case Open
show "No" at next boot.
, System Memory Multiplier, Memory Frequency(MHz)
(Note)
DRAM Timing Selectable is set to Quick or Expert. Note: Your system
- 19 -
System Memory Multiplier settings.
is set to Disabled, the value
is set to