Programming Alarm And Sensitivity - Fisher F-PULSE Owner's Manual

Programming Alarm and Sensitivityitivity:
1. Start with power ON.
2. Press-and-hold button. Do not release the button at the
first alarm (power-down-jingle).
3. Following the power-down-jingle:
• Wait 2 seconds
• Hear the program-menu-jingle
• Immediately release button
4. You are now in the Programming Menu.
5. In the Programming Menu:
• Pinpointer will not detect metal
• LED will flash continually, once per second, to indicate
you are in the Programming Menu
• Quick-press to advance to next setting
• Press-and-hold to:
a) save setting
b) turn Pinpointer off.
There are 6 settings to choose from:
SENSITIVITY LEVEL TARGET ALERT
1.
2.
3.
4.
5.
6.
Note: If target-alert set to vibrate-only, there will be no
beep at power-on or power-off.
d ____________________________________
Low
Medium
High
Low
Medium
High
Beep + Vibrate
Beep + Vibrate
Beep + Vibrate
Vibrate only
Vibrate only
Vibrate only