Update Muse; Manually Verify / Update The Firmware - Philips GoGear SA2MUS User Manual

4 Update MUSE

MUSE is controlled by an internal program
called firmware. Newer versions of the
firmware may have been released after you
have purchased MUSE.
The software program called Philips Songbird
can use your computer to check for firmware
updates that are available on the Internet.
Install Philips Songbird on your computer
(see chapter Install software) and follow the
instructions to update (see chapter Manually
verify / update the firmware).
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update the
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect MUSE to the computer
(see section Connect and charge for
instructions).
3
On your computer, click Start >
Programs > Philips > Philips Songbird to
launch the Philips Songbird application.
4
Click MUSE in the Player pane. Then,
select Tools > Check for updated
firmware in the pop-up window.
» Philips Songbird checks for updates
and installs new firmware from the
Internet, if available.
5
Follow the on-screen instructions to
update the firmware of MUSE.
6
Wait until the update is completed, then
disconnect MUSE from the computer.
MUSE restarts after the firmware is
»
updated and is ready for use again.
EN
13