Table of Contents
Advertisement
Troubleshooting
How do I reset my player?
Insert a pen tip or other sharp object into the reset hole located at
the bottom of the player. Hold until the player shuts down.
If none of the above works, then you may have to use the
Device Manager to recover your player:
1
Launch the
Philips Device Manager at Start > Programs >
Philips Digital Audio Player > SA29XX > Philips SA29XX
Device Manager on your PC.
2
Press and hold the
connecting to the PC.
3
Keep holding the key until the
acknowledges your player and goes into recovery mode.
4
Click the
Repair button and follow the instructions given by the
Device Manager.
After the player has been repaired, disconnect it from your PC
5
and re-start.
OPTIONS
button while your player is
Philips Device Manager
15
Advertisement
Table of Contents
