Connect And Charge; Use The Supplied Usb Cable; Battery Level Indication - Philips GOGEAR SA054104K User Manual

Philips mp3 player user manual
Table of Contents

Advertisement

3.4 Connect and charge

When you connect the player to the PC, it automatically charges.

3.4.1 Use the supplied USB cable

1
Before you use the player for the first time, charge it for at least 5 hours.
>
The battery
1
2
Connect the mini USB plug of the supplied USB and AV cable to the mini USB port at the
bottom of the player, the other USB plug to your PC.
>
The player will start to charge as soon as it is connected to your PC.
Note The player is fully charged when the charging animation stops and
displayed. Your fully charged player will allow up to 20 hours

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:
Full
Note When the batteries are almost empty, the battery screen
saves all settings and unfinished recordings and switches off in less than 60 seconds.
Rechargeable batteries have a limited number of charge cycles. Battery life and number of
1
charge cycles vary by use and settings.
has a 100% charge after 4 hours and an 80% charge after 2 hours.
Two-thirds full
Half full
of music playback.
1
Low
blinks. The player
is
Empty
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gogear sa054108kGogear sa054116k

Table of Contents