17 Troubleshooting
If SA065 is not working properly or the display
freezes, you can reset it without losing data:
How do I reset SA065?
•
Insert a pen tip or other object into
the reset hole located at the bottom of
SA065. Hold until the player shuts down.
•
If the reset option is unsuccessful, follow
the steps how to recover SA065 with the
Philips Device Manager:
1
On your computer, select Start >
Programs > Philips Digital Audio Player
> SA065 Device Manager > Philips
Device Manager to launch the Philips
Device Manager.
2
Turn off SA065 before you continue.
3
Press and hold the volume button
while you connect SA065 to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges SA065
and enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect SA065 from your computer.
7
Restart SA065.
EN
24