Table of Contents
Advertisement
Malfunction
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Detergent residue on
the damp laundry.
Detergent residue on
the dry laundry.
Home Connect func-
dishonor not correctly.
No connection to
the home network.
Cause and Troubleshooting
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
pinched.
Make sure that the drain pipe and the water
▶
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Start the programCentrifuge.
▶
Unbalance control system compensates for
imbalance through reduced spin speed.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Start the programCentrifuge.
▶
Detergents may contain water-insoluble substances,
which deposit on the laundry.
Start the programTo rinse.
▶
Detergents may contain water-insoluble substances,
which deposit on the laundry.
Brush the laundry after washing and drying.
▶
Various causes are possible.
Go to www.home-connect.com.
▶
Wi-Fi is turned off.
→ †Activate WiFi on the device", page 36
▶
Wi-Fi is activated, but the connection to the home
network cannot be established.
Verify that the home network is available.
1.
Reconnect the device to the home network.
2.
→
†Device with WLAN home network (WiFi) with
TroubleshootingNL
51
Advertisement
Table of Contents
