Gigaset 4015 Classic, GBR, A31008-G4015-J101-1-7619
Appendix
Fault
The ringer/dialling
tone cannot be
heard.
Error beep is
generated
(descending tone
sequence)
The answering ma-
chine announces
"PIN is incorrect"
during remote
operation.
The answering
machine does not
record any mes-
sages, announce-
ments or infotexts
An answering
machine message
does not have a
time stamp
Guarantee
Over the guarantee period from the date of purchase from the stock-
ist, Siemens AG will rectify all material or manufacturing defects by
repairing or replacing the defective device.
As of 01.01.2002, the European guarantee period will be 12 months.
The guarantee does not cover damage caused by improper use, wear
and tear or third party access. The guarantee shall not cover consum-
ables or defects which only slightly decrease the value or serviceability
of the device.
50
anha.fm
Possible cause
You have changed
the telephone cord
on your Gigaset.
Wrong input
The system PIN
entered is incorrect.
Memory is full
The date/time not
set
14.09.01
Solution
Ensure, when purchasing
a new cord, that it has
the correct pin assign-
ment (see page 6).
Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
Re-enter the system PIN.
Delete old messages
Play back and delete
new messages
Set the date/time