Table of Contents
Advertisement
DFU
IFACE / HIFACE ITV Setup Menu Item Descriptions (continued)
CURRENT RING* (1 / 2 / 3 / 4)
Determines which of the four channel rings is currently in effect. The current channel ring can also be selected by
means of the RESET button on the setup remote (when the setup remote is in setup mode). Also see C
________________________________________________________________________________________________
SWITCH ON CHANNEL* (STANDARD/AV1/ AV1YC/ AV2/AV2YC/CVI/TV 1-125) SETUP x CONSUMER
Applicable to / available in Commercial Mode / setup menu only. If S
channel to which the television will be adjusted at power-on will be the last channel / input to which it was tuned when
the television was last powered off. If S
or channel to which the television will be tuned at power-on. Note: AV1YC / AV2 / AV2YC are not applicable to the
20FT3010/37.
________________________________________________________________________________________________
POWER ON* (STANDARD / FORCED)
Applicable / available only to the Commercial Mode / setup menu. When POWER ON is set to FORCED, the television
will automatically power-up whenever it is supplied with mains power. With POWER ON set to FORCED, the televi-
sion will remain powered on long as mains power is applied, and cannot be turned off with a guest-mode remote, or
with the television's keyboard (even if the keyboard is not locked out). When POWER ON is set to STANDARD,
the television will remain in standby mode (i.e. off) when AC power is applied or resumed, until the unit is powered on.
________________________________________________________________________________________________
CHANNEL DISPLAY* (NUMBER / LABEL / ALL / NONE)
Applicable to / available in Commercial Mode / setup menu only. CHANNEL DISPLAY determines the channel infor-
mation (NUMBER and / or LABEL), if any, that is displayed briefly whenever the channel is changed. Also see LABEL
in CHANNEL INSTALLATION. Also see REMINDER.
________________________________________________________________________________________________
KEYBOARD LOCK* (OFF / ON)
Applicable to / available in Commercial Mode / setup menu only. If KEYBOARD LOCK is set to ON, the television
will not respond to commands from its local keyboard (power, channel, volume, etc.). When KEYBOARD LOCK is set
to ON, the television responds to commands from its local keyboard (power, channel, volume, etc.)
________________________________________________________________________________________________
ESP* (OFF / 1 - 99)
Applicable / available only to the Commercial Mode / setup menu. ESP (Energy Savings Programmability), if not OFF,
determines the number of hours (1 - 99) the television will remain powered on after the most recent front panel keyboard
or remote control command. NOTE: If POWER ON (see POWER ON STANDARD / FORCED) is set to FORCED,
ESP has no effect.
________________________________________________________________________________________________
WELCOME MESSAGE* (>)
Applicable / available only to the Commercial Mode / setup menu. The W
for an on-screen message to appear whenever the television is first turned on. The message will remain until any front-
panel keyboard command or remote control command is received. The W
Use cursor-up and cursor-down to select the W
M
message is highlighted, use cursor-left and cursor-right to enter and exit message-edit mode and position the
ESSAGE
cursor within the line of the message content. Use cursor-up and cursor-down to change the character at the current posi-
tion. Press RECALL on the Setup Remote to exit the editing mode and resume W
tion. NOTE: W
ELCOME
20FT3010/37
O
WITCH
N
WELCOME MESSAGE
MESSAGE
LINE 1
LINE 2
CLEAR
EXIT
ELCOME
M
, when ON, overrides CHANNEL GUIDE at power-on, if the latter has been enabled.
ESSAGE
* COMMERCIAL FEATURE
050404.0944
SETUP x CONSUMER
WITCH
C
is set to a particular input or channel, that will be the input
HANNEL
SETUP x
SETUP x
SETUP x
SETUP x
SETUP x
ELCOME
OFF / ON
(20 CHARACTERS)
(20 CHARACTERS)
>
>
M
sub-menu item. While Line 1 or Line 2 of the W
ESSAGE
11
PRELIMINARY
FEATURES MENU_
O
C
is set to STANDARD, the
N
HANNEL
CONSUMER
FEATURES MENU
CONSUMER
FEATURES MENU
CONSUMER
FEATURES MENU
CONSUMER
FEATURES MENU
CONSUMER
FEATURES MENU
M
feature makes it possible
ELCOME
ESSAGE
M
sub-menu is shown below.
ESSAGE
M
sub-menu item selec-
ELCOME
ESSAGE
I
.
HANNEL
NSTALL
FEATURES MENU_
_
_
_
_
_
ELCOME
Advertisement
Table of Contents
