Set The Answer Mode; Announcements - Philips CD480 User Manual

Set the answer mode

You can set the answering machine and select if
the callers can leave messages. Select [Record
also] if you allow the callers to leave messages.
Select [Answer only] if you forbid the callers to
leave messages.
1
Select [Menu] >
then press [OK] to confirm.
2
Select an answer mode, then press [OK]
to confirm.
» The setting is saved.
Note
•
If the memory is full, the answering machine
switches to [Answer only] mode automatically.

Announcements

The announcement is the message your caller
hears when the answering machine picks up
the call. The answering machine has 2 default
announcements: the [Record also] mode and
[Answer only] mode.
> [Voice answer],
Record an announcement
The maximum length of the announcement
you can record is 3 minutes. The newly
recorded announcement automatically
replaces the old one.
1
Select [Menu] >
then press [OK] to confirm.
2
Select [Record also] or [Answer only],
then press [OK] to confirm.
3
Select [Record new], then press [OK] to
confirm.
4
Recording starts after the beep.
5
Press [OK] to stop recording or the
recording stops after 3 minutes.
» You can listen to the newly recorded
announcement on the handset.
Note
•
Ensure that you speak close to the microphone
when you record an announcement.
Listen to the announcement
1
Select [Menu] >
then press [OK] to confirm.
2
Select [Record also] or [Answer only],
then press [OK] to confirm.
3
Select [Play], then press [OK] to confirm.
» You can listen to the current
announcement.
Note
•
You can no longer listen to the announcement
when you pick up an incoming call.
> [Announcement],
> [Announcement],
EN
37