Casio Exilim EX-Z57 User Manual page 174

VIEWING IMAGES ON A COMPUTER
8.
Press the USB cradle's [USB] button.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle's [USB] lamp to light
green (page 201).
9.
Your Macintosh will see the camera's file
memory as a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• Your Macintosh will see the camera's file memory as
a drive whenever you establish a USB connection
between the camera and your Macintosh.
10 .
Double-click the drive icon for the camera's
file memory, the "DCIM" folder, and then the
folder that contains the image you want.
NOTE
• If you open a rotated image on your Macintosh, the
original unrotated version will appear (page 121).
This is true both for a rotated image opened from
camera memory and for a rotated image that has
been copied to your Macintosh hard disk.
11.
Double-click the file that contains the image
you want to view.
• For information about file names, see "Memory
Folder Structure" on page 177.
12.
To copy all the files in file memory to your
Macintosh hard disk, drag the "DCIM" folder
to the folder to which you want to copy it.
IMPORTANT!
• Never use your computer to edit, delete, move, or
rename images stored in the camera's file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
13.
To terminate the USB connection, drag the
drive icon that represents the camera to
Trash.
14.
Press the USB cradle's [USB] button. After
making sure the [USB] lamp is not lit, remove
the camera from the USB cradle.
174
B