HoMedics LUMBAR LIFT Instruction Manual And Warranty Information page 4

Fig. 1
Fig. 2
Fig. 3
Fig. 4
FPO
HEAT BUTTON
Fig. 5
INSTRUCTIONS FOR USE
1. Insert the adapter jack into the Lumbar Lift then insert the power
cord into a 120-volt AC outlet. Press the power p button (Fig. 1).
2. Press and hold
to deflate. Press and hold
(Fig. 2).
3. To start the vibration, press the
button again to turn the vibration off (Fig. 3).
4. To toggle between different auto settings, press the auto button
that best fits your needs (Fig. 4). In the auto settings, the Air Lift
will raise and lower in a preprogrammed sequence.
: Air lift + Vibration
: Air lift
5. To turn the heat function on, press the
choose between three different levels (Fig. 5).
LOW: Green Light
MEDIUM: Blue Light
HIGH: Red Light
6. To turn off, press the power p button again.
4
to raise the airbag. Press
again to continue lifting lumbar
button. Press the
button. You can
again