Formatting Built-In Memory - Casio EX-Z30/EX-Z40 User Manual

OTHER SETTINGS

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 116), protected
files (page 115), and BESTSHOT user setups (page
73).
• Formatting memory deletes the startup screen image
(page 122) and the Power Down Image (page 123).
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 138).
2.
In the REC mode or the PLAY mode, press
[MENU].
3.
Select the "Set Up" tab, select "Format", and
then press [ ].
4.
Use [ ] and [ ] to select "Format", and then
press [SET].
• To exit the format operation without formatting,
select "Cancel".
135