Table of Contents
Advertisement
Ostia User Manual
Point of Interest
Waypoint
Press Next to proceed to step 3.
3. All possible street crossings are listed. Make a
selection and press Finish to proceed to step 4.
4. Specify if the intersection is an Origin or
Destination. If you want to save the location to
the waypoint database, check the save-option
box and give a waypoint name up to 50 letters.
The selected intersection will be displayed in
Green if an origin or Red if a destination.
Note: To modify a previous selection, press the
Back button.
Select this menu item to find a point of interest
on the currently opened map. Note, many points
of interest are not on a street, you may have to
use the closest intersection for routing purposes.
Selecting a point of interest is an easy 3 (three)-
step process.
1. Select a category of point of interest from the
scrollable list, then press Next to proceed to
step 2.
2. Select the desired point of interest. Press
Finish to proceed to step 3.
3. Specify if the location is an Origin or
Destination. If you need to save the location to
the waypoint database, check the save-option
box and give a waypoint name up to 50 letters.
The selected point of interest is marked and its
nearest road segment or intersection will be
displayed in Green if an origin or Red if a
destination.
Note: To modify a previous selection, press the
Back button.
Select this menu item to find a waypoint from
the previously stored database.
Selecting a waypoint is an easy 2 (two)-step
process.
1. On the Waypoint List screen type the first
several numbers and/or letters of a desired
waypoint name. A list of closely related
waypoint names will appear in the scrollable
window. Select the desired waypoint name,
then press Finish to proceed to step 2.
Page 8
Advertisement
Table of Contents
