Auto Answer
The Auto Answer function works like an automatic answering
machine. It relays the recorded message to the caller if you
do not answer the call for a specified period of time.
Auto Answer
Set Auto Answer to [On/Off]. If set to [On], the Auto Answer
function will be enabled.
Recorded Message
Displays a list of recorded messages during call active (In
call). Each list displays the recorded date & time of the file
and the message caller ID as well. Press [Delete] to delete
the message in the View list, and press the [Send] key to
make a call while confirming recorded messages.
Response Message
Depending on your current situation, a different answering
message will be played, including. [Absent / Meeting / Driving
/ User Message]. The User Message is the voice message of
the local user that will be answered in the standby mode.
Response time
Sets the automatic answering time (3 secs / 5 secs / 10 secs
/ 20 secs). When the response time elapses without
answering the incoming call, the recorded message will be
relayed to the caller. If the caller decides to leave a voice
message, recording will be started with a beep sound.
106
User Message
Displays your voice message set for the response message.
Press the [
] key for playback. If no message is recorded,
only the recorder function will be used.
107