Charge The Device; Battery Management - Ematic FunTab Manual

Setting Setting Up Up
Setting Setting Up Up Your
Charge the device
Charge Charge Charge the the the device device device
1 Plug the power adapter into an electrical wall outlet.
2 Connect the power adapter to the device's power interface port to
fully charge the battery before use (approximately 4 hours).
NOTE: NOTE:
NOTE: The device cannot be charged via the USB cable. NOTE:
NOTE: NOTE:
NOTE: NOTE: The device can be used while the battery is charging,
although the charging time is longer when operating and charging
at the same time.
Battery Management
Battery Battery

Battery Management

Management Management
The battery is not fully charged out of the box, so it is recommended you
charge the battery for at least 4 hours before you start to use the device.
The rechargeable battery is designed and manufactured to be used and
recharged frequently. As with all batteries, the capacity of the battery
reduces each time it is charged/depleted. However, you can still try to
prolong the battery's lifetime by following the suggestions below:
Use your Tablet at least once a week.
•
• Charge the battery regularly and fully.
• Never leave the battery fully discharged for a long period of time.
•
Always keep the device and the battery away from heat.
7 | Setup
All manuals and user guides at all-guides.com
Your Your FunTab FunTab
Your FunTab FunTab Tablet
Tablet Tablet
Tablet
a. While charging, the battery
indicator light
and then drain with an
image of a lightning bolt.
b.
When fully charged, the
battery indicator light
is green.
will fill