Tesla MODEL X 2015 Owner's Manual page 144

Controls
NOTE: Model X must be in Park to change the language.
When you change the language, you experience a brief
delay as Model X shuts down and restarts the
touchscreen.
Voice Recognition Language: Choose the language to
be used for voice commands.
Voice Navigation Language: Choose the language that
the navigation system uses for spoken instructions.
Time: Choose to display time in either 12 or 24 hour
format.
Energy Display: Choose to display remaining energy and
charging units as either a percentage of battery energy
remaining, or as an estimate of the distance you can
drive.
Distance: Choose to display range using miles or
kilometers.
Temperature: Choose to display temperature using
Fahrenheit or Celsius.
Tire Pressure: Choose to display tire pressures using
BAR or PSI.
Trips
View the odometer and view and reset up to two trip
meters that summarize how far you have driven (see
Information on page 85).
Navigation
Customize how the navigation system works:
• Navigation Volume: Increase or decrease the volume
of spoken navigation instructions by touching - or +,
respectively. Fully decreasing the volume mutes the
instructions. You can also mute navigation
instructions when a navigation route is active by
touching the volume icon on the turn-by-turn
direction list.
NOTE: This volume setting applies only to the
navigation system's spoken instructions. It does not
change the volume of media player and phone calls.
• Automatic Navigation: If enabled and your phone's
calendar is synced to Model X, you are automatically
routed to an event if you get into Model X within two
hours of the event's start time (assuming the event
on your calendar includes a valid address). When this
feature is turned on, Model X also automatically
initiates a navigation route to your specified Home
and Work locations on weekdays (see
Navigation on page 152).
142
• Trip Planner: Use trip planner (if available in your
market region) to plan your driving and add stops at
superchargers if charging is needed to reach a
destination to which you are navigating (see
Planner on page
• Online Routing: When selected, Model X can
automatically reroute you to a navigation destination
to avoid delays (see
• Avoid Ferries: When on, navigation routes avoid the
use of ferries.
• Avoid Tolls: When on, navigation routes avoid the use
of tolls.
NOTE: You can also display these navigation settings by
touching the settings icon on the map (see
Navigation on page
Safety
Allow Mobile Access: Allow your Tesla mobile app to
access your Model X (see
NOTE: To disable Allow Mobile Access, you must enter
your Tesla account credentials.
Parking Brake: Manually apply and release the parking
brake (see
Power Off: Manually power off Model X (see
Off on page
Trip
Speed Limit Mode: Speed Limit Mode allows you to limit
acceleration and limit the maximum driving speed to a
chosen value between 80 and 145 km/h. The first time
you use this feature, you must create a 4-digit PIN that
you must use to enable and disable Speed Limit Mode.
When enabled and the driving speed approaches within
approximately 5 km/h of the maximum speed, a chime
sounds, the instrument panel displays a message, and
Model X sends a notification to the mobile app. To
enable Speed Limit Mode:
1. Ensure Model X is in Park.
2. Touch Controls > Safety > Speed Limit Mode on the
touchscreen, or touch Controls in your mobile app.
3. Select the maximum driving speed.
4. Drag the slider to the On position.
5. Enter the 4-digit PIN that you want to use to enable
and disable Speed Limit Mode.
NOTE: If you forget the PIN, you can disable Speed
Limit Mode by entering login credentials for your
Tesla account.
Automatic
NOTE: While Speed Limit Mode is enabled, the
acceleration setting (Controls > Pedals & Steering >
Acceleration) automatically sets to Chill.
154).
Online Routing on page
150).
Mobile App on page
Parking Brake on page 77).
62).
MODEL X Owner's Manual
Trip
154).
Maps and
178).
Powering