Panasonic TH-42PZ77U Operating Instructions Manual page 29

(Continued)
Sets the mode to select the channel with Channel up/down button (Favorite/All)
Favorite: Only channels registered as FAVORITE (p. 35)
Selects the screen menu language (p. 18)
Adjusts the clock (p. 18)
Sets channels (p. 34)
Selects the terminal and label of the external equipment (p. 36)
[Comp. 1/Comp. 2/HDMI 1/HDMI 2/Video 1/Video 2/Video 3]
To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu.
(p. 36) (On/Off)
Displays subtitles (Closed Caption) (p. 36)
Controls equipment connected to HDMI terminals (p. 30) (On/Off)
"Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.
Sets "Power off link" of HDMI connection equipment (p. 30) (Set/No)
Sets "Power on link" of HDMI connection equipment (p. 30) (Set/No)
Selects the default speakers (p. 30) (TV/Theater)
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 38)
Change the brightness of the side bar (Bright/Off/Dark/Mid) (4:3 mode only)
The recommended setting is "Bright" to prevent panel "Image retention". (p. 49)
To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes.
(Set/No)
Note
Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD Mode", or Digital channel.
"No signal shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No signal shut-off".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or front panel key
continues for more than 3 hours. (No/Set)
Note
Not in use when setting "Auto power on" or "On/Off Timer".
"No action shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No action shut off".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 34)
Sets the mode to select the channel with Channel up/down button (Favorite/All)
Sets favorite channels. (p. 21)
Displays Closed Caption. (p. 36) (Off/On)
Changes the station identifier. (p. 34)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 34)
Adjustments/Configurations (alternatives)
Adjustments/Configurations (alternatives)
Surf mode All
Language
Clock
Program channel
CC
EZ Sync On
Power off link Set
Power on link Set
Default speakers TV
Auto power on No
Side bar Bright
No signal shut-off Set
No action shut-off No
About
Reset
29