Radio Mode; Direct Memory - Panasonic CQ-DF701W Operating Instructions Manual

Radio
E
N
G
L
I
S

Radio Mode

1
H
Press [SOURCE] to change to the radio mode.
7
Band
2
Press [BAND] to change the band.
Source
FM1
FM2
FM3
AM
REMOTE
SET/AUTO•P
BAND
CH C •
!@
VOL
P • SET
TUNE
MENU
TRACK
DISC
MUTE
Tuning
3
[TUNE $]/[$]: Up
[TUNE %]/[%]: Down
Press and hold [TUNE $] or [TUNE %]/[$] or
[%] for more than 0.5 seconds, then release.
Seeking will start.
POWER
[SOURCE]
SOURCE 1 2
RAND
[1] to [6]
3 4
VOL
SCAN REP
Preset button
5 6
MENU
["] [#]
SEL
[BAND]
(PRESET
BAND
MEMORY)
[%] [$]
(SELECT) MUTE DISP
(TUNE)
Car Audio
16
CQ-DF701W
Radio mode display
FM stereo indicator
CQ-DF701W
OPEN
50W 4
MOSFET X
; / 1
DISP
D • M
PWR
SOURCE
S•HDB
DIM
HDB
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

Direct Memory

Your favorite radio station can be memorized in
[D M] on the main unit.
•
Default: FM 87.50 MHz
Memorize
1 Select a band and frequency (steps 1,
3).
2 Press and hold [D M] for more than 2 seconds.
•
Frequency blinks once and is saved in the mem-
ory.
Note:
≥ The new station is overwritten on existing saved
stations after following this procedure.
Recalling the Direct Memory
Press [D M].
•
Press [D M] again to cancel and return to the previ-
•
ous source.
Note:
≥ You can recall the direct memory when the power
is off.
One-Touch Selection of a Preset Station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a sta-
tion in the preset
memory
Auto Preset
Memory
2 and
(AUTO P)
•
Automatically save
strong stations in the
preset memory
Note:
≥ New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
1 Select a band and frequency (steps 1, 2
page).
Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than
2
2 seconds until the preset number blinks.
Press [P. SET "] or [P. SET #]/["] or [#] to select a preset num-
3
ber.
Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than
4
2 seconds to memorize.
≥ The display blinks once, and a re-
ceiving station is saved in the
memory.
Preset number
Note:
≥ Frequency setting can be performed even after selecting a preset num-
ber.
Entering Numbers Directly from the Remote Control
1 Select a band and frequency (step 1, 2 and 3
Press and hold [1] to [6] on the remote control for more than 2 sec-
2
onds to memorize.
1 Select a band (steps 1 and 2 on the
Scanning:
previous page).
2 Press and hold [BAND] (AUTO P) for
•
more than 2 seconds.
≥ The 6 strongest available stations will be automatically saved in the
memory under preset number 1 to 6.
≥ Once set, the preset stations are sequentially scanned for 5 seconds
each.
≥ Press [P. SET "] or [P. SET #]/["] or [#] for the broadcast you
want to listen to.
(Press [1] to [6] on the remote control.)
1 Select a band (steps 1 and 2 on the previous page).
Press [P. SET "] or [P. SET #]/["] or [#] to select the preset
2
number for tuning in the preset station.
Entering Numbers Directly from the Remote Control
Press [1] to [6] on the remote control.
E
N
G
L
I
S
H
8
and 3 on the previous
on the previous page).
17
CQ-DF701W