Cam Operation; Camera Id; Shutter Speed; Shutter Select - Panasonic AJ-SPX800 Operating Instructions Manual

8-5

CAM OPERATION

8-5-1

CAMERA ID

Items/ Adjustable
Data Saved Range
ID1 Setting 1 for the CAMERA ID recorded on
color bars. Up to 10 characters are allowed
for this setting.
– C U F –
ID2 Setting 2 for the CAMERA ID recorded on
color bars. Up to 10 characters are allowed
for this setting.
– C U F –
ID3 Setting 3 for the CAMERA ID recorded on
color bars. Up to 10 characters are allowed
for this setting.
– C U F –
<Note>
This setting is canceled when READ FACTORY DATA is
selected.
8-5-2

SHUTTER SPEED

Items/ Adjustable
Data Saved Range
SYNCHRO ON Allocate SYNCHRO SCAN as a shutter
SCAN OFF speed selectable by the shutter switch.
– C U F E
SUPER V ON Allocate SUPER V as a shutter speed
selectable by the shutter switch.
OFF
– C U F E
POSITION1 ON Allocate the shutter speed set by POSITION
SELECT in the <SHUTTER SELECT>
OFF
screen as the shutter speed selectable by
the shutter switch.
– C U F E
POSITION2 ON Allocate the shutter speed set by
OFF POSITION2 SELECT in the <SHUTTER
SELECT> screen as the shutter speed
selectable by the shutter switch.
– C U F E
POSITION3 ON Allocate the shutter speed set by
POSITION3 SELECT in the <SHUTTER
OFF
SELECT> screen as the shutter speed
selectable by the shutter switch.
– C U F E
POSITION4 ON Allocate the shutter speed set by
POSITION4 SELECT in the <SHUTTER
OFF
SELECT> screen as the shutter speed
selectable by the shutter switch.
– C U F E
POSITION5 ON Allocate the shutter speed set by
POSITION5 SELECT in the <SHUTTER
OFF
SELECT> screen as the shutter speed
selectable by the shutter switch.
– C U F E
POSITION6 ON Allocate the shutter speed set by
POSITION6 SELECT in the <SHUTTER
OFF
SELECT> screen as the shutter speed
selectable by the shutter switch.
– C U F E
102
Remarks
Remarks
8-5-3

SHUTTER SELECT

Items/ Adjustable
Data Saved Range
SUPER V FRM1 Select the SUPER V switching mode.
FRM1: Normal mode.
MODE FRM2
FRM2: After-image reduction mode.
<Note>
The SUPER V mode increases vertical
resolution by directly outputting the photo-
diode vertical signal from the CCD. FRM1
sets the accumulation level to 1/30th
second. FRM sets the level to 1/60th
second, reducing sensitivity by half.
– C U F E
POSITION1 1/100 Select the shutter speed to be allocated to
SEL 1/120 POSITION1.
1/250
1/500
1/1000
1/2000
– C U F E
POSITION2 1/100 Select the shutter speed to be allocated to
POSITION2.
SEL 1/120
1/250
1/500
1/1000
1/2000
– C U F E
POSITION3 1/100 Select the shutter speed to be allocated to
SEL 1/120 POSITION3.
1/250
1/500
1/1000
1/2000
– C U F E
POSITION4 1/100 Select the shutter speed to be allocated to
SEL 1/120 POSITION4.
1/250
1/500
1/1000
1/2000
– C U F E
POSITION5 1/100 Select the shutter speed to be allocated to
POSITION5.
SEL 1/120
1/250
1/500
1/1000
1/2000
– C U F E
POSITION6 1/100 Select the shutter speed to be allocated to
SEL 1/120 POSITION6.
1/250
1/500
1/1000
1/2000
– C U F E
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks