Casio Exilim EX-P505 User Manual page 178

PRINTING IMAGES
1.
Press [MENU].
2.
Select the "Set Up" tab, select "USB", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
When connecting to this type of
device:
Computer
PictBridge-compatible printer
• Mass Storage causes the camera to see the
computer as an external storage device. Use this
setting for normal transfer of images from the camera
to a computer (using the bundled Photo Loader
application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.
4.
Check the battery level indicator to make sure
that the battery is charged sufficiently, and
then press the power button to turn off the
camera.
• If battery power is low, charge the battery or switch
to AC power.
Select this setting:
Mass Storage
PTP (PictBridge)
178
• To power the camera using AC power, you need to
purchase an optionally available AC adaptor.
• The camera does not draw power over the USB
cable.
5.
Use the USB cable that comes with the
camera to connect the camera to a printer.
• When connecting the USB cable to the camera,
make sure the symbol on the camera's [USB/AV]
port is aligned with the
plug.
USB
symbol on the USB cable
symbols
USB/AV
C