Asko DBI675IXXLS.U Operating Instructions Manual page 33

Table continued from last page
Problem
Water remains in the dishwasher
above the filters.
Bad odor in dishwasher.
Grease deposits in the dishwash-
er.
Possible causes
The filters are blocked.
The filters are not fitted correctly.
Debris in the drain pump.
Drain pump stop missing.
Kink in drain hose.
Blocked drain hose.
Dirt around the seals and in
corners.
Low temperature programs have
been selected for a prolonged
period.
The dishwasher is connected to
a garbage disposer.
Low temperature programs have
been selected for a prolonged
period.
Troubleshooting
Action
Clean the coarse and fine filters.
Check that the filter handle is
locked in the stop position.
Clean the drain pump. See the
chapter Care and maintenance
instructions.
Check that the colored stop on
the right in the bottom drain is in
place. See the chapter Care and
maintenance instructions.
Check that the hose is free from
kinks and sharp bends.
Loosen the drain hose from
where it terminates. Check that
no debris has clogged the hose.
Is the cone-shaped part of the
drain boot cut to the maximum
size of the fitting where it attach-
es?
Clean with dish brush and low
foaming cleaner.
Run a program with a high tem-
perature once or twice a month.
Or run a self-cleaning program.
See Self-cleaning in the chapter
Using the dishwasher.
Cleaning the garbage disposer
connected to the dishwasher
can eliminate odors. Follow the
disposer manufacturer's clean-
ing instructions.
Select a program with Intensive
mode (Heat Boost). The pro-
gram will use a higher tempera-
ture to dissolve grease on very
dirty dishes. Or run a self-clean-
ing program once or twice a
month. See Self-cleaning in the
chapter Using the dishwasher.
33