Parallel — One Speaker (Dual 4 Ohm Voice Coils) - Orion XTR Subwoofers XTR102 Owner's Manual

Parallel — One Speaker (dual 4 ohm voice coils)
One dual 4 ohm voice coil woofer with voice coils in parallel results in a 2 ohm load
to the amplifier.
_
Figure 4
Figura 4
+
Abbildung 4
1. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire both positive (+) terminals of the woofer to the positive (+) terminal on
the amplifier. Wire both negative (-) terminals of the woofer to the negative (-)
terminal on the amplifier.
© 2008 directed electronics—all rights reserved
_
+
_
+
5