Troubleshooting - D-Link DSM-210 Quick Installation Manual

C . Attach the Stand
To place the Internet Photo frame on a shelf or a
flat surface, attach the supplied stand.
Align the arrow on the stand with the arrow on
the back of the frame (approximately at the 2:00
position).
• To use in horizontal position (as shown), turn
the stand counter-clockwise to the H position
until the stand locks into place.
• To use in vertical (portrait mode) position, turn
the stand clockwise to the V position until the
stand locks into place.
D . Power ON the DSM-210
Plug the supplied power adapter into the
power receptor on the bottom of the DSM-210.
Plug the power cord into a power outlet.
Power on the DSM-210 by pressing the Power
button.
E . Insert the D-Link DSM-210 install CD into your CD-ROM drive

Troubleshooting

1. My remote control isn't working?
- Make sure the battery protector is removed
- Replace the battery with new one
2. How do I use the D-Link Widget for my DSM-210?
D-Link offers a Widget to use with your DSM-210 frame. The D-Link Widget requires Yahoo
Widgets to be installed in your PC. Please click the Yahoo link from the D-Link DSM-210
CD.
3. Why does my front panel button no longer work after changing the faceplate?
If the unit is on and the faceplate is changed, the front panel buttons & blue LEDs will not
longer work. No harm is done, you only need to power down the frame to recover.
4. How do I update the firmware on my DSM-210?
Your frame must be connected to the Internet to perform an upgrade. When connected, the
DSM-210 will automatically notify you if a firmware upgrade is available. If there is an
upgrade available, the Upgrade Firmware icon will be displayed. Select the icon to upgrade
the firmware and press OK on the remote.
3