Table of Contents
Advertisement
Available languages
Available languages
Metering
This setting allows you to adjust the metering point.
1.
Press MENU button to enter the settings menu of the photo mode.
2.
Press Up / Down buttons to select Metering in the settings menu and then MENU button to enter the submenu.
3.
Press Up / Down buttons to select an option: Center / Multi / Spot.
4.
Press MENU button to confirm your choice and then MODE button to return to photo mode.
Macro
This setting allows you to adjust the photo shooting of a more or less distant (10cm 25cm) object by focusing the right
hyperfocal distance.
Note:
The camera is by default in Far shooting mode.
1.
Press MENU button to enter the settings menu of the photo mode.
2.
Press Up / Down buttons to select Macro in the settings menu and then MENU button to enter the submenu.
3.
Press Up / Down buttons to choose between: On (= Macro shooting
4.
Press MENU button to confirm your choice and then MODE button to return to photo mode.
General setup of the camera
The camera setup menu can be accessed in all modes by pressing MENU button once and then pressing Right button, and is
mainly used to modify certain settings specific to the camera operation.
Beep sound
This setting allows you to switch the sound of the camera buttons on or off.
1.
Press MENU button and then Right button to enter the setup menu of the camera.
2.
Press Up / Down buttons to select Beep in the setup menu and then MENU button to enter the submenu.
3.
Press Up / Down buttons to choose between: On / Off.
4.
Press MENU button to confirm your choice and then MODE button to return to photo mode.
Frequency
This setting allows you to reduce flickering and avoid strips effect when photo shooting.
Note: the default frequency setting is 60Hz.
1.
Press MENU button and then Right button to enter the setup menu of the camera.
2.
Press Up / Down buttons to select Frequency in the setup menu and then MENU button to enter the submenu.
) / Off (= Far shooting
).
Advertisement
Table of Contents
