Casio ID-15 Operation Manual

MA0505-EA
ILLUSTRATION
ALM/SNZ INVALID ON SNZ
OFF
INVALID °C/°F RESET SET
INVALID
1cm
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
PM
indicator
Date
(month - day) Day of the week
Operation Guide ID-15
ALM/SNZ INVALID ON SNZ
OFF
°C/°F RESET SET
INVALID
ALM/SNZ INVALID ON SNZ
OFF
RESET SET
°C/°F
Snooze Alarm On
Current time
(Hour, minutes,
Snooze on
seconds)
indicator
Current temperature Alarm time Alarm on indicator
GENERAL GUIDE
1 1 1 1 1 ALM/SNZ button
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
3 3 3 3 3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
° °
4 4 4 4 4 C/ F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 5 5 5 5 SET button
Use this button when setting the current time.
6 6 6 6 6 RESET button
Press this button to reset the clock after replacing its batteries.
• Buttons marked "INVALID" have no function.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
Year Setting Screen Month and Day
Setting Screen
2. While the screen you want is displayed, use the + and
– buttons (3) to change the flashing digits.
• Holding down + or – changes the flashing digits at high
speed.
• You can set the year in the range of 2000 to 2039. The
day of the week is set automatically in accordance with Press
the date setting. increase
• Pressing + or – while the Time Setting Screen is on the
the flashing
digits.
display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour
Timekeeping Screen is on the display toggles between
12-hour and 24-hour timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Time Setting Screen 12-hour/24-hour
Timekeeping Screen
ALM/SNZ INVALID ON SNZ
OFF
INVALID °C/°F RESET SET
+ –
to Press to
decrease
the flashing
digits.
1