Singer SP 1000 Instruction Manual page 5

10
8
1
1. BASE HEAT INSULATION
2. WATER SUPPLY TUBE FOR IRON
3. POWER WIRE WITH PLUG
4. STEAM SWITCH
5. STEAM LED
6. IRON POWER SWITCH
7. VALVE FOR WATER TANK
8. HEAT INSULATION SUPPORT FOR IRON
9. CONSTANT TEMPERATURE TUNER
10. STEAM SPRAY BUTTON
11. CONSTANT TEMPERATURE LED
TEMPERATURE TUNING
- Please check the ironing instruction first on the material you are going to iron. Generally
speaking, the ironing instruction consists of several circle icons with iron. These icons
provide the instruction for the temperature tuning. (Please refer to the form hereinafter)
- If without ironing instruction, but the material is known, the form hereinafter may also
provide guidelines for the known material.
- Print cloth and material alike only fit for the low temperature ironing.
- If one cloth consists of different material, then please choose the temperature
according to the material which takes greater proportion. (For example, one cloth
consists of 60% polyester and 40% cotton, will fit the temperature for polyester in the
form, and not fit for steam ironing)
- Please classify the cloth according to its heat resistance. The heating speed will always
be faster than the cooling speed. So, you should always begin the ironing with the part
requiring the lowest temperature.
- Nylon, cellulose acetate and other compound material temperature tuning
- Cotton and silk temperature tuning
- Cotton and linen temperature tuning
- Maximum temperature (steam ironing)
_Instruction Manual.indd 3
7
9
11
4 5 6
GBR
2
3
3
30.03.2012 11:34