Gps Status And Status Icons; Enabling And Disabling The Touchscreen - Garmin FORERUNNER 955 Owner's Manual

DOWN
• Press to scroll through the glances, data screens, options, and settings.
• Hold to open the music controls
START · STOP
• Press to start and stop the activity timer.
• Press to choose an option or to acknowledge a message.
BACK
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during an activity.

GPS Status and Status Icons

For outdoor activities, the status ring turns green when GPS is ready. A flashing icon means the watch is
searching for a signal. A solid icon means the signal was found or the sensor is connected.
GPS GPS status
Battery status
Phone connection status
Wi‑Fi technology status
Heart rate status
Running Dynamics Pod status
Speed and cadence sensor status
Bike lights status
Bike radar status
Extended display mode status
Power meter status
tempe
VIRB

Enabling and Disabling the Touchscreen

You can customize the touchscreen for general watch use and for each activity profile.
NOTE: The touchscreen is not available during swim activities. The touchscreen setting for each activity profile
(such as run or bike) applies to the corresponding leg of a multisport activity.
• To enable or disable the touchscreen during general use or activities, hold
select an option.
• To customize a hot key to temporarily enable or disable the touchscreen, hold
2
(Music, page
sensor status
™
® camera status
83).
, select System > Touch, and
, select System > Hot Keys.
Introduction