Nikon Coolpix P1 Manual page 175

Problem
• Camera is off.
• The optional EH-62C AC adapter kit is not properly
PictureProject
• UC-E6 USB cable is not correctly connected, or card
does not start
when camera is
• USB in the Interface menu set to PTP when camera
connected or
memory card
inserted in card
reader or card
• Camera is not registered in Device Manager (Win-
slot
See PictureProject Reference Manual (on CD) for further
information.
CHOOSE PRO-
FILE screen does
• Set the USB option to PTP in the Interface menu of
not appear in
Wireless transfer
mode
• Set host.
• Move closer to the access point.
Signal is weak • Remove any obstacles between the camera antenna
• Change camera facing.
Signal was
interrupted and
• Turn the camera off and then turn it on again.
picture could
not be sent
Possible cause
connected, or battery is exhausted.
not properly inserted in card reader or card slot.
connected to computer running Windows 2000 Pro-
fessional, Windows Millennium Edition (Me), or Win-
dows 98 Second Edition (SE).
dows only).
the setup menu.
and computer.
c
14
14
62
61
–
61
138
–
141
163