Part Names And Functions; Projector; Controls - NEC SX10000 User Manual

1. Part Names and Functions

Projector

Remote Sensor
PC Card Slot
Insert a PC memory card
here to upgrade the
projector system software
or copy data. To access
the slot, loosen the screw.
AC INPUT
Connect the supplied power
cable here (AC 200-240V).
Power Switch (Main power)*
* To turn on the main power to the projector, press the switch to the ON
position (I) and the POWER indicator on the rear panel will turn or-
ange in color.
Press to the OFF position (0) to turn the main power off.
NOTE: When turning off the main power, first return the projector to the standby
condition by pressing the POWER OFF button on the remote control or the POWER
button on the rear panel and then turn off the main POWER switch. These pro-
cedures are necessary to protect your projector and the connected equipment.
Stacking Pad (4 pcs)
Lens (Optional)

Controls

Carrying Handle
Foot
Input Terminal Panel
Carrying Handle
E – 2
Ventilation (out)