Charging The Battery - Motorola V600 Manual

Charging the Battery

New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery as described below. Some batteries
perform best after several full charge/discharge cycles.
Action
1 Plug the travel
charger into
your phone with
the release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, press
the release tab and remove the travel charger.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
Release
Tab
13