G10/G4B/G5 (Power Supply) Board And Batv (Main) Board Removal - Sony KDL-32EX729 Service Training Manual

G10/G4B/G5 (POWER SUPPLY) BOARD AND
BATV (MAIN) BOARD REMOVAL
NOTE:S:
Refer to "Handling the LVDS FFC Connector" on page 3
The Insulation Sheet (G10), Insulation Sheet (G4), Label (BATV Mold Side) and Label Sheet (BATV Mold
Side) are not included with the LCD Panel and must be replaced when replacing the LCD Panel.
A Remove 5 screws and disconnect 3 connectors from G10A/G4B/G5 Board
B Disconnect 5 connectors from BATV Board (Refer to
C Remove 5 screws from BATV Board
D Release 2 clips to detach Side Bracket from BATV Board
KDL-32EX729/40EX729/46EX729
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
to disconnect the LVDS Connector.
"Handling the LVDS FFC Connector" on page
D
B
C
A
NOTE: Les composants identifies per un trame et
NOTE: The components identified by shading
une marque
and mark are critical for safety. Replace only
!
Ne les remplacer que par une piece portant le
with part number specified.
numero specifie.
(Check the Sony Authorized Servicer Portal at
3)
REF. NO. PART NO. DESCRIPTION
201 4-258-701-01 LABEL, (BAT-V MOLD SIDE)
(KDL-32EX729 ONLY)
ORDER THIS PART WHEN REPLACING THE REAR COVER
201 4-256-435-11 LABEL, SHEET (BAT-V MOLD SIDE)
(KDL-40EX729/46EX729 ONLY)
ORDER THIS PART WHEN REPLACING THE REAR COVER
202 4-265-832-02 BRACKET SIDE (BAT-V32)
(KDL-32EX729 ONLY)
202 4-265-828-01 BRACKET SIDE (BAT-V MOLD)
(KDL-40EX729/46EX729 ONLY)
203 A-1824-358-A BATV BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
NOTE: The components identified by a red outline and a
sont critiques pour la securite.
! confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
http://www.sony.com/asp website for any additional service related issues.)
201
202
203
204
205
[ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION
204 NA G10 BOARD, COMPLETE
(KDL-32EX729 ONLY)
FOR ALL POWER SUPPLY BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL.
204 1-474-300-11 G4B BOARD, COMPLETE
(KDL-40EX729 ONLY)
204 NA G5 BOARD, COMPLETE
(KDL-46EX729 ONLY)
FOR ALL POWER SUPPLY BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL.
205 4-268-446-01 SHEET, INSULATION (G10)
(KDL-32EX729 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
205 4-268-443-01 SHEET, INSULATION (G4)
(KDL-40EX729/46EX729 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41 SCREW (+PSW) (M3X6)
mark contain
[ASSEMBLY INCLUDES]
49