Download Print this page

Neilsen CT5457 Instruction Manual

80l pneumatic waste oil extractor

Advertisement

Quick Links

80L PNEUMATIC WASTE OIL EXTRACTOR CT5457
INSTRUCTION MANUAL
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

Advertisement

loading

Summary of Contents for Neilsen CT5457

  • Page 1 80L PNEUMATIC WASTE OIL EXTRACTOR CT5457 INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
  • Page 2: Ec Declaration Of Conformity

    In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description:80L PNEUMATIC WASTE OIL EXTRACTOR Model: CT5457 Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 12100:2010 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
  • Page 3 Structure diagram Operating principal diagram Part names 1. oil collecting pan 2. vacuum gauge 3. vacuum generator 4. 1/4”ball valve 5. measuring glass 6. 3/4”ball valve 7. pumping pipe 8. air inlet pipe 9. set screw 10. oil tank Technical data Tank capacity: 80 L Degree of vacuum: negative 0~0.8bar Operating air pressure: 8-10 bar...
  • Page 4 Operating instruction Pumping waste oil into oil tank 1. Connect the properly selected suction pipe with the pumping pipe, then insert the suction pipe into the sight hole for lubrication oil of engine, and shut off the switch on pumping pipe. 2.
  • Page 5 1. Shut off the switch between measuring glass and oil tank(note: it is important to shut off the switch, or the overpressure maybe damage measuring glass). 2. Unscrew to open the switch connecting to elbow, elbow hangs waste oil drum. 3.
  • Page 6: Important Notice

    4. Surface of device should be wiped regularly with towel or wiping cloth to keep the cleanness.The device should be stored in cool and dark place free of direct sun shining. Important notice 1. The device can be operated only by trained qualified personnel. 2.
  • Page 7 out even though it had been inserted in, or pipe may be damaged. To avoid the loss for user due to reason above, drain oil plug is your optimal selection. 8. A mesh type muffle is mounted on the cup of pumping unit, water or oil will be splashed out if there is water in air compressor or misoperation.
  • Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...