Alpine HALO9 Quick Reference Manual page 19

he
cording
re
3
the
wn
M2.6× 8)
that
f the
Install the display unit (iLX-F509/
iLX-F511)
-60mm
1
or -45mm
ar
m)
ar
m)
-60 mm
Sheet Rear
(2×50 mm)
Attach the Cover Rear to the rear of the
display unit using 2 screws (M2.6×6).
Secure the screws, then attach the Sheet
caps.
Sheet caps (Included)
Cover Rear (Included)
Fix the Display unit to the slider of the main
unit using 4 screws (M5×8).
Screws (M5×8) (Included)
CAUTION
Do not adjust the display angle when the display
unit is not fixed to the slider of the main unit using
4 screws (M5 × 8). Doing so may not turn power
on.
2
Mount the Power Plate.
Screws
(M2.6× 6)
(Included)
• If the Power Plate is not mounted, the display unit
may not be turned power on. Make sure to
mount it.
3
Mount the Cover Hinge using 2 screws
(M3×4).
Secure the screws, then attach the Sheet
Hinges.
Screws (M3×4)
(Included)
ALPINE iLX-F509 68-41657Z87-A_QRG (EN)
Power Plate (Included)
Sheet Hinges
(Included)
Cover Hinge
(Included)
17
EN
FR
ES
-EN