Kinput Capacity; Kmaking Corrections During Input; Kreplay Function - Casio fx-100W User Manual

• You cannot set the angle unit or the display mode while
the calculator is in the BASE-N mode.
• The COMP, CMPLX, SD, and REG modes can be used
in combination with the angle unit modes.
• Be sure to check the current calculation mode (SD, REG,
COMP, CMPLX) and angle unit mode (DEG, RAD, GRA)
before beginning a calculation.
k Input Capacity
• The memory area used for calculation input can hold 79
"steps." Whenever you input the 73rd step of any calcu-
lation, the cursor changes from "_" to "k" to let you know
memory is running low. If you still need to input more,
you should divide your calculation into two or more parts.
k Making Corrections During Input
e
• Use and
want.
[
• Press
cursor position.
A K
• Press
something while the insert cursor is on the display in-
serts the input at the insert cursor position.
e
• Press
sor from the insert cursor.
k Replay Function
• Pressing
formed. You can then make any changes you want in
the calculation and re-execute it.
t
• Pressing
recall the last calculation even after you press
• Replay memory is cleared whenever you start a new
calculation, change to another mode, or turn off power.
r
to move the cursor to the location you
to delete the number or function at the current
to change to an insert cursor
r A K
, ,
r e
or recalls the last calculation you per-
does not clear Replay memory, so you can
=
, or returns to the normal cur-
E-9
t
. Inputting
t
.