Table of Contents
Advertisement
Operation Instructions
WARNING:
The heater must be properly installed before it is used.
This unit is equipped with one On/Off switch.
• Plug the Patio Heater into a grounded 220-240V 50Hz power outlet.
• Only operate the heater when it is in the upright position.
• Press on the On/Off switch to the "I" position to activate the heater.
Remote Control
A. To operate the heater on 2000W power, press
the button
of the remote control.
B. To operate the LED light on, press the button
of the remote control
Touch switch
A. Touch the
one time, turns the heater on
2000W power.
B. Touch the
two times, turns the LED on.
C. Touch the
three times, turns the heater on
2000W power and turns the LED on.
D. Touch the
four times, turns the heater and
LED off.
•
To deactivate the heater, press the On/Off
switch to the "O" position.
•
Although the heater is showerproof, do not
use when raining or in wet conditions.
•
Always disconnect the power cable from the
electrical supply, when the patio heater is
not in use.
Advertisement
Table of Contents
