Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Venturer HDP-3202-BS
- Page 1 Instruction Manual HDD Digital Audio Player HDP3202BS...
-
Page 2: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. 2. Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. - Page 4 SAFETY PRECAUTIONS DANGER Serious injury or death can result if not handled as directed. • Connect the AC adapter only to rated power outlet as described in the user manual. • Do not touch the AC adapter with wet hands. If the inside or outside of the adapter gets wet, and electric shock may result.
-
Page 5: Table Of Contents
CONNECTING THE POWER...8 INSTALLING THE USB DRIVER ...10 USING IN PC...12 Using your MP3 Player without Windows Media Player 10...12 Using your MP3 Player with Windows Media Player 10...13 Synchronize tracks to the MP3 Player...14 Disconnecting the Player from your Computer...17 GETTING STARTED...18... -
Page 6: Names Of Each Part
NAMES OF EACH PART Front Overview Side Overview MENU MODE ENTER STOP - 5 -... -
Page 7: Stop
Function of Controls LCD Display To display current status. MENU Button In Music/Record display mode or during playback, press this button to go into main menu. MODE Button During playback, press this button to set play mode. Or press and hold this button to set the EQ mode. F.F Button Press “... - Page 8 STRAP MOUNT For buckling the strap (not included). RESET HOLE For resetting the unit. POWER Button Press this button to turn on/off the device. HOLD Knob Slide this button to lock/unlock the buttons. Microphone For voice recording. RECORD Button In record mode, press this button to record some songs or others.
-
Page 9: Connecting The Power
CONNECTING THE POWER AC adapter Safety • The uninsulated parts inside the adapter could cause electric shock. For your safety, do not open the case of the adapter. • Read this Instruction Manual to prevent any problems that may occur while using the adapter. - Page 10 CONNECTING THE POWER Notes: • When the battery voltage level is low, “ will power off automatically if the “Battery Low!” message appears. Please charge it. • If a power source is connected, the product is being charged and the “Charging...”...
-
Page 11: Installing The Usb Driver
INSTALLING THE USB DRIVER Windows 98 Only When connecting the unit to your PC (Windows 98) for the first time, the USB mass storage function will not be activated without driver installation. Please use installation CD to install the driver and follow the processes below. - Page 12 4. Select “CD-ROM Drive” and click “Next”. 5. USB driver file is found. Click “Next”. 6. USB driver installation is completed, click “Finish” and restart your computer. - 11 -...
-
Page 13: Using In Pc
Using your MP3 Player without Windows Media Player 10 It is unnecessary to set USB mode if you are running the Windows 98/ Me/2000 operating system. -
Page 14: Using Your Mp3 Player With Windows Media Player 10
Windows Media Player 10 and Windows XP (above version SP1) PC are required for the device to properly function when in the DRM Music mode. • You can download Windows Media Player 10 from Microsoft by going to www.microsoft.com/windows/windowsmedia/download/default.asp. 1. Set the USB mode to DRM Music. -
Page 15: Synchronize Tracks To The Mp3 Player
4. The track(s) will begin downloading to your PC. Synchronize tracks to the MP3 Player 1. Open Windows Media Player10. a) Click the Library tab from the menu bar on the top of the Windows Media Player screen. - Page 16 5. Locate a song in the Library and Right-Click on it. Select “Add to -> Sync List”, then the song will be added to “Sync List”. Repeat and add other songs. 6. Click Sync and the “Sync List” pane appears. Select the “Portable Media Player”...
- Page 17 7. Click “Start Sync” to transfer the songs. A progress indicator will show each file transferring. After transferring, the notice message “Synchronized to Device (7 items)” appears on the left side of the screen. Total 7 songs are synchronized to player. - 16 -...
-
Page 18: Disconnecting The Player From Your Computer
Disconnecting the Player from your Computer Windows 98: — 1) After use, you can directly unplug the device. 2) The “Removable Disk” disappears on the screen of your computer. Windows XP (in DRM Music mode) — 1) After use, you can directly unplug the device. 2) The “Portable Media Player”... -
Page 19: Getting Started
GETTING STARTED Power On 1. Press the POWER button to power on the player. Note: If the onscreen message says “Key Locked !” and then shuts off, you need to locate the HOLD knob on the side of the device (see HOLD function below for details). -
Page 20: Playing Music Files
Unlock Buttons • To release all function buttons by sliding the HOLD knob to left, and the “Cancel Lock” dialog box appears briefly. PLAYING MUSIC FILES 1. Connect the earphone to the player. 2. Press the POWER button to power on the player. -
Page 21: Recording
To Skip a Track • During playback, you can skip a track by pressing the “ ” or “ ” button. Each press skips one track. The first press on the skip backward “ ” button goes to the beginning of the current track. •... -
Page 22: Playing The Recorded Files
Recording via Line In 1. Set the record mode to Line In, then go back to the main menu. 2. Connect the Line-Out or earphone jack of the external device to the earphone jack of the unit with the Line-In cord (not included). 3. -
Page 23: Searching Music
SEARCHING MUSIC After downloading some musics, the system will categorize all songs automatically. 1. Press the “ ” or “ ” button to select and highlight the MUSIC item in the main menu, then press the ENTER button. 2. Press the “ ”... -
Page 24: Playlist Operation
PLAYLIST OPERATION User can select favorite music and add to playlist or delete music from playlist. Add Files to Playlist 1. First, search your favorite musics. (Please refer to page 22 details about how to search the music files.) 2. Select a favorite track and press the ENTER button, then “Added to Playlist”... - Page 25 1. Go into the other music folder (except playlist folder) and the “ ” icon indicates that this track is added to the playlist. 2. Select a track marked the “ ” icon and press the ENTER button, then “Deleted from Playlist” appears on the display.
-
Page 26: Setting Play Mode
SETTING PLAY MODE The device supports a variety of play modes. During playback, you may directly set your desired play mode. 1. During playback, press the MODE button and it pops up the Mode menu. 2. Press the “ ” or “ ”... - Page 27 Repeat- Playing repeatedly all tracks of the current folder 1. In the Mode menu, press the “ or “ ” button to select and highlight Repeat item. 2. Press the ENTER button once to confirm. • The “ ” icon appears on the display. All tracks of the current folder will be •...
-
Page 28: Setup Function
Shuffle All - Playing all tracks of all folders in random order 1. In the Mode menu, press the “ or “ ” button to select and highlight the Shuffle All item. 2. Press the ENTER button once to confirm. •... -
Page 29: Music
SETUP OPERATION The setup includes: Music, Record, USB, Back Light, Sleep Timer, Factory RST and Format. Use the Setup features to set detailed options for each function. 1. Press the POWER button to power on the player. 2. Press the “ ”... -
Page 30: Music Setup
MUSIC SETUP 1. In the setup menu, press the “ “ ” button to select and highlight the Music item. 2. Press the ENTER or “ ” button. • It includes: Mode & EQ. Mode (Play Mode) 1. Press the “ ”... -
Page 31: Usb
RECORD SETUP 1. In the setup menu, press the “ “ ” button to select and highlight the Record item. 2. Press the ENTER or “ ” button. 3. Press the “ ” or “ ” button to select Microphone or Line In. 4. -
Page 32: Back Light
BACKLIGHT SETUP 1. In the setup menu, press the “ “ ” button to select and highlight the Back Light item. 2. Press the ENTER or “ ” button. 3. Press the “ ” or “ ” button to select the time of the backlight. 4. -
Page 33: Factory Reset
FACTORY RESET To restore the unit to the factory default settings. 1. In the setup menu, press the “ “ ” button to select and highlight the Factory RST item. 2. Press the ENTER or “ ” button to confirm. Note: The data of the unit wil still remain after this function is performed. -
Page 34: Information
INFORMATION 1. Press the POWER button to turn the power on. 2. Press the “ ” or “ ” button to select and highlight the Information item in the main menu. 3. Press the ENTER button and the memory information will appear on the display. -
Page 35: Troubleshooting
TROUBLESHOOTING Should any problem persists after you have made the following checks, please consult your nearest service facility. The device can not power on. • Check if the built-in battery is discharged. Connect the AC adapter to recharge. No sound •... -
Page 36: Specification
SPECIFICATION Type Item Capacity Operating System Interface Frequency Audio Headphone Output Signal to Noise ratio Files File format AC adapter Power Supply Built-in Rechargeable Battery Capacity Dimension General Weight Design and specifications are subject to change without notice! Specification 20GB Windows 98/ME/2000/XP USB 2.0 20Hz~20KHz... - Page 37 Please check and identify the supplied accessories. AC Adapter ... x 1 USB Cord ... x 1 Earphones ... x 1 Installation CD ... x 1 - 36 -...
- Page 38 811-340291-010...