Blind Spot Monitoring (Bsm) System; Information Display - Mazda 2010 Mazda6 Smart Start Manual

Mazda6 quick start guide
Hide thumbs Also See for 2010 Mazda6:
Table of Contents

Advertisement

Feature Highlights

BLIND SPOT MONITORINg (BSM) SYSTEM

The Blind Spot Monitoring (BSM) system is designed to assist the driver
by monitoring the blind spots to the rear of the vehicle on both sides.
• I f your vehicle speed is 20 mph (32 km/h) or more, the BSM will warn
you of vehicles in the detection area by illuminating the BSM warning
lights located on the left and right door mirrors.
• I f you operate a turn signal in the direction of an illuminated BSM
warning light, the system will also warn you with a beep and warning
light flash.
• B SM sensors are located under the left and right rear bumper areas.
The BSM system may not operate properly if the rear bumper gets too
dirty, so keep the rear bumper area clean.
Please refer to your Owner's Manual for complete details.
Turning BSM System Off
To manually turn the BSM system off, push the BSM OFF switch on the dash.
The BSM OFF indicator will illuminate in the instrument cluster when the BSM
system is off. The BSM system will automatically turn on the next time the
vehicle is started.
Your Vehicle
Detection Areas
NOTE:
Do not rely completely on the BSM system and be sure to look over
your shoulder before changing lanes:
• The BSM system can assist the driver in confirming the safety of the surroundings,
but is not a complete substitute.
• The driver is responsible for ensuring safe lane changes and other maneuvers.
• Always pay attention to the direction in which the vehicle is traveling and the
vehicle's surroundings.
13
• The BSM system does not operate when the vehicle speed is lower than about
20 mph (32 km/h).
180567_10a_Mazda6_SSG_050709.indd 14-15
PORTABLE AUDIO PLAYER INTEgRATION
USINg ThE AUX JACK
Your vehicle is equipped with an AUX or auxiliary jack
that will allow you to play your portable audio player
through the vehicle's audio system. Learn the system
when parked and do not let it distract you while driving.
Refer to the Owner's Manual for additional information.
NOTE:
You will need a cable with an 1/8 inch mini stereo
plug to connect your portable audio player into the aux jack.
1
Locate the AUX jack inside the center console.
2
Plug 1/8 inch mini stereo plug into the portable
audio player and into the AUX jack. Turn portable audio player on.
3
Turn the vehicle audio system on.
4 • Without Navigation System: Push AUX (or CD/AUX) button on
audio system OR push MODE button on steering wheel controls until
"AUX" is displayed.
• With Navigation System: Push SOURCE button on audio system,
then push AUX1 on screen OR push MODE button on steering wheel
controls until "AUX1" is displayed.
5
Use the portable audio player controls to play music.
NOTE:
Set the volume level on your portable audio player to the highest level
before distortion starts. Then adjust the volume in the vehicle using the audio system
power/volume control or the steering wheel volume up and down controls.

INFORMATION DISPLAY

Climate
Control
Temperature
Trip Computer/
Display
Clock
(Driver)
Audio
Temperature
Display
(Passenger)
14
5/7/09 9:47:16 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 6

Table of Contents