Advertisement
Table of Contents
- 1 Table of Contents
- 2 General Installation Procedure
- 3 Amplifier Feature Descriptions
- 4 P500.2 / P1100.2 / P1400.2 / 2-Channel Amplifier Applications
- 5 P900.4 / P1400.4/ P1800.4 / 4-Channel Amplifier Applications
- 6 P1000.1 / P1500.1 / 1-Channel Amplifiers Applications
- 7 P5000.5 / 5 Channel Amplifier Feature Description and Applications
- 8 Features and Specifications
- 9 Setting up Systems after Installation for Best Performance
- 10 Troubleshooting and Diagnostics
- 11 Product Warranty
- Download this manual
Advertisement
Table of Contents
Related Manuals for Crunch PowerZone P 1400.2
Summary of Contents for Crunch PowerZone P 1400.2
-
Page 2: Table Of Contents
P5000.5 / 5 CHANNEL AMPLIFIER FEATURE DESCRIPTION AND APPLICATIONS...8 Features and Specifications...9 Setting Up Systems After Installation For Best Performance...10 Troubleshooting and Diagnostics...11 Product Warranty...12 The contents of this manual may not be reproduced or copied with out the written consent of MAXXSONICS USA, Inc. PAGE... -
Page 3: General Installation Procedure
System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion. -
Page 4: Amplifier Feature Descriptions
AMPLIFIER FEATURE DESCRIPTIONS POWERZONE AMPLIFIERS: Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation except the mono amps which are capable of 4, 2 and 1-Ohm loads. Tri-Mode operation with any stereo pair of amplifier channels is possible, as with all bridgeable amplifiers. -
Page 5: P500.2 / P1100.2 / P1400.2 / 2-Channel Amplifier Applications
FULL RANGE STEREO This is the most basic application for the POWERZONE Series 2 channel amplifiers. 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables. 2. Crossover Switch: The X-OVER switch must be in the FULL position. 3. - Page 6 P500.2 / P1100.2 / P1400.2 / 2-CHANNEL AMPLIFIER APPLICATIONS Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system In this application we will use a 2 channel amplifier for the high frequencies, and a second one for the low frequencies, or mono sub bass. Please consult the speaker specifications to determine maximum amplifier power requirements.
-
Page 7: P900.4 / P1400.4/ P1800.4 / 4-Channel Amplifier Applications
P900.4 / P1400.4 / P1800.4 / 4 CHANNEL AMPLIFIER APPLICATIONS 4 CHANNEL FULL RANGE SYSTEM Here we show how to use the 4 channel amplifiers as straightforward discrete 4 channel full range units. Interconnect cable checklist: - Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables. Switch setting checklist: - 1/2CH X-OVER: FULL - 3/4CH X-OVER: FULL... - Page 8 2 way active, or bi-amplified system with mono bass This application shows how easily a 2 way active system can be implemented using a 4 channel amplifier. Channels 1 and 2 will be used for highs, and channels 3 and 4 for mono bass. Interconnect cable checklist: - We need to feed the same signal to both sets of channels, so must use 2 Y- adapters, one to feed the LEFT signal to channels 1 and 3, and the right signal to...
-
Page 9: P1000.1 / P1500.1 / 1-Channel Amplifiers Applications
P1000.1 / P1500.1 / MONO AMPLIFIER APPLICATIONS Basic application These sub bass amplifiers can be used any of the bi-amplification systems described in this manual, replacing the 2 channel amplifiers as per the illustrations. Interconnect cable checklist: Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables. -
Page 10: P5000.5 / 5 Channel Amplifier Feature Description And Applications
P5000.5 / 5 CHANNEL AMPLIFIER FEATURE DESCRIPTION The 5 channel amp have the same features as the 4 channel models accept that there is an additional set of controls for channel 5 The X-OVER slide switch selects the internal crossover functions: -The input signal is routed directly to the LINE OUT RCA jacks, regardless of the X-OVER setting simplifying daisy chaining of amplifiers. -
Page 12: Setting Up Systems After Installation For Best Performance
SETTING UP SYSTEMS AFTER INSTALLATION FOR BEST PERFORMANCE P500.2 / P1100.2 / P1400.2 / P900.4 / P1400.4 / P1800.4 / P5000.5 General: At this point you are ready to get more specific on the settings for your amplifier. High Pass: -When in Hi Pass operation, this setting acts as a low frequency cut off for your system reproduction. -
Page 13: Troubleshooting And Diagnostics
TROUBLESHOOTING A SYSTEM The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all PowerZone amplifiers The diagnostic system will shut down the amplifier, until reset by turning the head unit off, and back on. -
Page 14: Product Warranty
As the manufacturer of Maxxsonics, Autotek, Crunch, MB Quart and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase.