Controls And Their Functions - Marantz ST4000 User Manual

CONTROLS AND THEIR FUNCTIONS (See
page 50)
q
POWER (STANDBY/ON) Button
w
SLEEP Button
e
TIMER Button
Press this button with DAILY preset and the indicator will shown on
the display.
r
Multi-function Display
z SLEEP Indicators
x RDS, FILE, SLEEP TIME mode Indicators
• RDS: PS, PTY DATA will be displayed, and RDS indicator
lights.
• FILE: Alphabets, symbols, and numbers will be displayed
when you write a broadcasting name with File Button (up to
4 letters).
• Timer mode: When the DAILY function is programmed, the
daily ON/OFF times will be shown in the display.
c Tuned Indicator
This indicator lights when correctly tuned to a broadcast.
v STEREO Indicator
This indicator will light up when FM stereo broadcasting is re-
ceived.
b TIMER Indicator
n Frequency mode, TIME Indicator
• The frequencies of FM, AM (MW) will be displayed.
• Hour, Minute: When you program current time, DAILY, the
times of On/Off, and the hour and minute of CT among RDS
will be displayed.
m Channel Display
The channel number selected by use of the PRESET UP/DOWN
button will be shown in the display.
, Signal Indicator
The reception status of the broadcasting.
. MEMORY Indicator
t
PRESET UP/DOWN Buttons
• Broadcast Memory function: Each time you press the PRESET
UP/DOWN button briefly (for 0.5 second or less), you can listen
to broadcasts in a programmed sequence. This function is used
to memorize FM or AM (MW) broadcasting, or to select memo-
rized broadcasts.
y
TUNING UP/DOWN Buttons ( / )
Used to select the broadcast you want to listen to or adjust the
current time, DAILY, SLEEP presets, etc.
u
DISPLAY Buttons
1) The button works only when you receive FM broadcasting sta-
tions, and is used to set the RDS mode.
2) Press the button longer than 1 second, and PTY search will
become operable.
i
DAILY Button
o
TIME ADJUST Button (See page 5)
!0
ST. NAME Button (See page 5)
!1
NEXT Step Button (See page 5)
!2
FM MODE Button
Used to select stereo or mono when listening to FM broadcasts.
NOTES:
• The AM scan step can be changed by pressing the FM MODE
buttons simultaneously for 5 seconds. (overseas version only)
!3
MEMORY Button
• MANUAL: To preset FM or AM (MW) in the system, pres briefly
(0.5 second or less).
• AUTO: When you press the button for long (more than 0.5 sec-
ond), FM or AM (MW) broadcasting will automatically be preset
in the system.
!4
BAND selector Button
Press the button to switch between FM and AM (MW) bands.
4