External Device Connection - Telefunken TF-PS2206 Instruction Manual

Portable mini music system with bluetooth
Table of Contents

Advertisement

Available languages

Available languages

• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
MODE
button
repeatedly
the Bluetooth mode.
• Once the Bluetooth pairing begins,
you will find the unit listed in the Bluetooth
connections list of your device (as TF-
PS2206).
• If asked for a passcode, enter "0000".
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• When playing files, you can press
the
button to pause and resume
playback.
• Press the
or
previous or next track. Rotate the volume
knob or press the volume buttons on the
remote to adjust volume.

External device connection

• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use an audio cable with 3.5mm-to-3.5
mm plugs to connect the headphone out or
audio line-out of the external device to the
AUX input of this unit.
• Press MODE button to select the AUX mode.
• Turn on the external device. You can
rotate the volume knob or press the volume
buttons on the RC to adjust volume.
to
select
button to go to a
Instruction Manual
USB/MicroSD operation
Playback
Turn on the device.
Insert a microSD (TF) card into the slot.
Or insert a USB drive into the USB
port. Press the MODE button repeatedly to
select the USB or MicroSD mode.
• When playing, you can press
to play/pause the playback.
• During the playback you can press
the
and
buttons to go to the previous
and next track. Rotate the volume indicator
to adjust volume.
It may take up to 60 seconds to open
and verify a large microSD card / USB drive
with many files.
• Press the REP button (
to switch between various repeat
modes (one track - all tracks - off).
The SD and USB are available only
when the corresponding storage device is
present.
General USB/MicroSD notes
• This unit is equipped with a microSD slot
and USB port that can read and play MP3
files stored on standard microSD cards and
USB drives up to 32 GB.
• FAT32 file system is supported
by this unit.
Never remove microSD cards and USB
drives from the unit during playback, always
stop playback, then press the MODE button
to switch to another mode before removing
the storage to prevent damage to your files
and cards/drives themselves.
Slight noise during playback pauses
is not a construction defect, it is
determined by the factory presets of the
dynamic noise reduction system.
on the RC)
4

Advertisement

Table of Contents
loading

Table of Contents