If the tamper‐evident seals are missing or peeled, avoid using the product and contact your
IOGEAR dealer.
If all front panel LEDs on the Secure KVM switch (except for Power LED), all Remote Port
Slector(RPS) LEDs flash, flash continuously or the switches' enclosure appears to be breached,
avoid using this product and contact your IOGEAR dealer.
This Secure KVM Switch and Remote Port Selector (RPS) are equipped with active always‐on
chassis intrusion detection security. Any attempt to open the enclosure will permanently
damage, disable the Switch and Remote Port Selector(RPS), and void the warranty.
To maximize security and to prevent unauthorized access to Secure KVM, please do change
default logon password after your first successful logon.
About This Admin Log Audit Code
This Admin Log Audit Code is intended for authorized administrators only.
This Admin Log Audit Code is provided to help authorized administrators audit logs/events and perform
administrator functions
Please refer to the IOGEAR Secure KVM Administrator's Guide for basic administrator functions
If the Secure KVM Switch becomes inoperable, Log/Event data logs can only be decoded by the Secure
KVM Switch manufacturer*
ATTENTION
Tamper‐evident seal
5