Mackie Srm1801 Features; Iec Ac Receptacle; Power - Mackie SRM1801 Owner's Manual

Mackie SRM1801 Features

The rear panel is where you connect AC power
and your signals to and from the subwoofer. You may
also adjust the level and polarity to match the other
loudspeakers in your system and account for the
subwoofer's location and your room's environment.

1. IEC AC Receptacle

Connect the detachable line cord to this IEC socket
securely, and plug the other end into an AC outlet.
Make sure the AC power is matched to the AC power
indicated on the rear panel above the IEC socket.
8
8 9 10 11
THERMAL OL SIGNAL POWER
OUTPUTS
HIGH PASS
A
LEVEL
7
+
- 6dB 6dB
6
FULL RANGE
POL ARITY A
NORMAL
INVERT
INPUTS
A
AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR

POWER

2 1
I
O
B
5
B
4
18-INCH POWERED SOUND REINFORCEMENT SUBWOOFER
B
3
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
SERIAL NUMBER REVISION
2. POWER
Press up on this switch to turn the SRM1801
subwoofer on. The power LED [11] above the LEVEL
knob [7] illuminates when the POWER switch is on and
AC power is available at the linecord socket.
Press the bottom of this switch to put the subwoofer
into standby mode. It will not function, but the circuits
are still live. To remove AC power, either turn off the
AC mains supply, or unplug the power cord from the
subwoofer and the AC mains supply.
also be powered off after the tops, but before the mixer
and other sources. This will reduce the possibility of any
turn-on, or turn-off thumps in your speakers.
As a general guide, powered
subwoofers should be turned on after the
mixer and other sources, but prior to full-
range speakers. Additionally, they should