Gigaset W570 / LUG MEA-ZA en / A31008-M2708-M231-1-3Z19 / settings_BS.fm / 10/1/19
Operating the base on the PABX
Resetting the base to the default settings
When the settings are restored:
•
Date and time are retained
•
Handsets are still registered,
•
Eco Mode and Eco Mode+ is deactivated,
•
The system PIN is not reset.
¤
Menu
Operating the base on the PABX
The following settings are only necessary if your PABX requires them; see the PABX user guide.
Changing the dialling mode
¤
Menu
= tone dialling (DTMF);
R
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a connection
(e.g., to listen to the network mailbox), you must switch to tone dialling for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
¤
Press the star key
Tone dialling is now activated for this call only.
Setting recall
¤
Menu
= 80 ms;
R
= 600 ms;
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key
phone number.
¤
Menu
= 1 second;
Changing the pause after recall key
¤
Menu
= 800 ms;
40
Settings
OK
System
R
= pulse dialling (PD)
.
R
= 100 ms;
= 120 ms;
= 800 ms
OK
R
= 3 seconds;
R
= 1600 ms;
OK
Reset Base
Enter digit for the dialling mode:
OK
Enter digits for recall:
= 400 ms;
Enter digit for the current pause length:
= 7 seconds
OK
Enter digit for the current pause length:
= 3200 ms
OK
OK
= 250 ms;
= 300 ms;
and sending the
de en fr nl