Figure 3-17: Ad-Hoc Mode Settings; Figure 3-18: Wireless Security - Linksys WMB54G User Manual

Wireless-G Music Bridge
3. If you chose Infrastructure Mode, go to Step 4 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen will appear.
Select the correct Channel for your wireless network. The channel you choose should match the channel set
on the other devices in your wireless network. If you are unsure about which channel to use, keep the default
setting.
Then, select the Network Mode in which your wireless network will operate. In Mixed, Wireless-B and
Wireless-G devices can both operate on the network, though at a slower speed. In Wireless-G-Only, no
Wireless-B devices can operate in the network.
Click Next to continue or click Back to change any settings.
4. The Wireless Security screen will appear. This step will configure wireless security.
If your wireless network doesn't use wireless security, select Disabled and then click the Next button to
continue. Proceed to Step 5.
Select WEP or PSK for the Encryption Method. WEP stands for Wired Equivalent Privacy, PSK stands for Pre-
Shared Key, which is a security standard stronger than WEP encryption. If you don't want to use encryption,
select Disabled.
Then, click the Next button to continue or the Back button to return to the previous screen.
Chapter 3: Setting up the Wireless-G Music Bridge
Starting the Setup Wizard

Figure 3-17: Ad-Hoc Mode Settings

Figure 3-18: Wireless Security

14