Table of Contents
Advertisement
Linksys E1000
WPA Personal
NOTE:
If you are using WPA2 or WPA, each
device in your wireless network MUST use the
same WPA method and shared key, or else the
network will not function properly .
Wireless Security > WPA Personal
Passphrase
Enter a passphrase of 8-63 characters . The
default is password .
WEP
WEP is a basic encryption method, which is not as secure
as WPA .
NOTE:
If you are using WEP encryption, each
device in your wireless network MUST use the
same WEP encryption method and encryption
key, or else your wireless network will not
function properly .
Wireless Security > WEP
Encryption
Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1
If you did not enter a Passphrase, enter the WEP
key manually .
Wireless-N Router
Chapter 3: Advanced Configuration
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE:
If you are using WEP encryption, each
device in your wireless network MUST use the
same WEP encryption method and encryption
key, or else your wireless network will not
function properly .
RADIUS
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port
Enter the port number of the RADIUS
server . The default is 1812 .
Shared Secret
Enter the key shared between the Router
and the server .
Encryption
Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1
If you did not enter a Passphrase, enter the WEP
key manually .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
22
Advertisement
Table of Contents
