Lindy 32898 User Manual page 8

Instruction Manual
9.
take a snapshot picture
To PC's Line In Port
Speaker Output
7.
Connect the USB 2.0 cable to the USB
Out Port on the Capture Box and to an
available USB 2.0 Port on your PC
Use the SNAP button to
8.
Connect the USB to DC Power Cable to
the DC-In Port on the Capture Box and to a
USB port on the PC
Audio Line
Out Port
USB Out Port
SNAP button
10.
Make sure the IR Remote Controller is aimed
directly at the LED detection window when using
it to control the Capture Box
5
5.
Connect one end
of the Audio Cable to
the Audio Line Out
Port on the side of
the Capture Box.
Connect the other
end to the Line In
Port on your PC
6.
Make sure your
PC has speakers
connected!
DC In Port