Installation
• Install the RING SPACER with the bolts on the set as shown. (Only RU-60PZ61 series)
1. Put the RING SPACER in the holes of the bolts before con-
necting to the wall mounting bracket.
External Equipment Connections
External Equipment Connections
Antenna Connection
Antenna Connection
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Antenna
O
12 Plasma TV
Bronze Wire
RF coaxial wire (75 ohm)
Turn clockwise to tighten.
Signal
Amplifier
2. When you connect the wall mounting bracket to the set,
connect to it by using the bolts, (supplied with the product),
as shown.
(R)
(L/MONO)
AUDIO
Be careful not to bend the bronze wire when
connecting the antenna.
• To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
• If the antenna needs to be split for two TV's, install a "2-Way
Signal Splitter" in the connections.
• If the antenna is not installed properly, contact your dealer
for assistance.
MONITOR
OUTPUT
A/V
Antenna
INPUT 1
S-VIDEO
VIDEO
Bronze Wire