Operation
Remote Control
Remote Control
PIP (Picture-In-Picture) / POP / Twin Picture
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other
source will show a smaller inset image.
- Twin Picture mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
- In PIP/POP/Twin Picture mode, the screen savers such as "
" may not be displayed on screen.
W
atching PIP/POP/T
W
atching PIP/POP/T
Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below.
Normal Mode
Selecting an Input Signal Source for PIP/T
Selecting an Input Signal Source for PIP/T
Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes
the PIP source. You can also select sources for the
Main Picture Source
DTV
Analog
Swapping the PIP
/T
Swapping the PIP
/T
Repeatedly, press the SWAP button to switch the main and sub pictures.
• Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI/DVI input sources for the main picture can't be used to
swap the main and sub pictures.
Main Picture
Sub Picture
TV Program selection for PIP
TV Program selection for PIP
1. Press the PIP button.
2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+
PIPCH- button to select a channel for the sub picture.
(You can't select DTV for main and sub picture simultaneously).
86 Plasma TV
win Picture
win Picture
PIP Mode
Available Sub Picture Sources
Analog, Video, and Front Video
DTV, Analog, Video, and Front Video
win Picture
win Picture
", "
POP Mode
D
F
E
PIP Off
win Picture
win Picture
in the
menu.
Main Picture
Sub Picture
" , "
", or "
Twin Picture Mode
TV 2-0
TV 4-0
TV 6-0
/